2000x1000mm Cutting dimensions steel 3Axis water jet cutting
The ACCURL abrasive waterjet machine is a high-pressure waterjet
machine that utilizes straight water cutting or abrasive waterjet
cutting to cut several types of material. The ACCURL Water-Jet is a
heavy-duty precision, ground ball screw designed system for maximum
precision and rigidity.
Perfect Waterjet Cutting:
ACCURL® Waterjet machining is achieved by forcing a large volume of
water under high pressure through a small orifice in the cutting
nozzle. The accelerated steam of water leaving the nozzle impacts
the material and starts the cutting process. Kerf from the
accelerated stream of water is extremely narrow. This pressure is
then concentrated in a small area on the material which starts to
erode the material. Softer materials can be cut with water
pressure. Harder materials require the use of an abrasive feed
system, such as metal cutting. The abrasive is introduced into the
high pressure water stream, which then starts the erosion of the
harder materials. Although waterjet machining is the slowest
cutting process, there are definite advantages that outweigh its'
1. No Heat-Affected Zone
2. No Mechanical Stresses
The fast, efficient, and precise ACCURL® Center provides top
performance in waterjet machining of complex parts from many
materials. From simple metals to complex composites, the 4’ 7”
square cutting area of the proven is ideal for rapid prototyping
and just-in-time manufacturing of small to medium-sized parts. With
simple fixturing and easy access to the cutting table, setup times
are significantly reduced, increasing productivity and
1. Fastest cutting speeds and best precision compared to any
abrasivejet in the industry and is backed by our exclusive NAIKY
PCIMC-6A® Software with real world cutting data
2. Programmable Motorized Z-Axis with a precision ACCURL® 5i Nozzle
Assembly can boost cutting productivity and process efficiency
3. Tilt-A-Jet® taper compensating abrasivejet cutting head
(available as an option)
4. Precision X-Y Axis rigidly mounted to the cutting table
5. Pre-loaded linear bearings and precision ball screws
6. Low maintenance, high reliability scissor-style hard plumbing
7. Drive system sealed against water, dirt, and grit
8. Easy operator access to the work area
9. High efficiency Generation 4 USA Hypertherm ® pump systems
available in 30, 40, or 50 hp with operating efficiencies up to 90%
10. Robust and accurate design for tight tolerance cutting and
11. Rapid Water Level Control for quiet and clean submerged cutting
12. Bulk Abrasive Delivery System transports garnet from the
assembly’s large hopper into the Zero Downtime Hopper located on
13. Optional Variable Speed Solids Removal System (VS-SRS) designed
for tough industrial use increases uptime through automated solids
14. Shipped as a completely pre-assembled and factory-tested system
Hp System: WJPOWER-420 420(Fully Imported Configuration)
Intensifier assembly is fully imported from Accustream/Hypertherm
Packing & Delivery
1. Our wooden case is after fumigation treatment.Needn’t timber
inspection,saving shipping time.
2. All the spare parts of the machine were covered by soms
softmaterials,mainly using pearl wool.
3. The outmost is wooben case with fixed formwork.
4. The botton of the wooden case has firm iron jack,covenient to
hading and transport.
1. Functional characteristic
1. The cutter head inclined at an angle in any
direction,eliminating the phenomenon f concave convex and uneven
cutting surface(to eliminate phenomenon of small surface and large
bottom).To make the front junction smaller, reduce grinding
link,can tile diretly.Reducing the polished and the production cost
2. Make the complex graphics more delicate and beautiful.
3. It turning without pause,no turning dot,make cutting speed
faster.The cutting surface roughness wil not affect the collage.
2. Processing characteristic
1. CNC forming complex patterns.
2. Environmental pollution,no toxic gases and dust.
3. Can process a variety of high hardness material ,such as
:glass,ceramics,stainless steel,or relatively soft material
4. Cutting smooth,no slag,doesn't need secondary processing.
5. Save the cost.
|working table||mm||2000 x 1000|
|Control accuracy||mm||± 0.01|
|Positioning accuracy||mm||± 0.02|
|High Pressure System||Max Pressure||380||380|
|Total electric power||KW||38|
|Max load of working table||Kgs||1000|
|Format supported||AI, PLT, DXF, etc|
|Product Name||2000x1000mm Water Jet Cutting Machine|